been building like a mad man
CST tactical 25cal
CST titanium 22cal
my own custom 20cal carbine
barrel work shortened to 19inchs
One or my FT 20cals
50cal been running
25calcustom shroud
25 cal custom Tactical
Vanquish tuning
25 cal build
Mark1 FT build
picked up a air compressor this year
25 cal build CST custom carbon fiber shroud
short stubby barrel work
308 Mark1 100fpe ++++
along with tons of parts made things are still rolling along
best regards swift
Wednesday, September 29, 2010
Saturday, December 5, 2009
Saturday, January 31, 2009
New stuff for the New Year
Have a lot of plans for this year the new elevation knobs are just the starters
Need custom rapid work
anodizing can be offered
along with custom barrel cutting and port work
high profile Rails can be custom made
or rail mods can be done
left and right handed models available check with your dealer .
Need custom rapid work
anodizing can be offered
along with custom barrel cutting and port work
high profile Rails can be custom made
or rail mods can be done
left and right handed models available check with your dealer .
Tuesday, October 14, 2008
My Web Site
this may be as close to a Web site as I get
I have been working on my own shop and have it setup for doing Airguns and fabrication of small parts for several different lines of work but i concentrate on PCP type air guns and hop up parts.
my main focus is the rapid mark II line of PCP but i also work on Daystates, AirArms,
and will do most any mods with these and other makes .
heres my shop setup .
i have this room dedicated for machine work and have it setup now thanks to Rutland Tool & supply
a 13 x40 gear head production lathe
Jet Mill 8 x36 table with DRO readout.
customer security system . come with guard dog
custom made parts with indexer or
rotary table for future work
custom port work on barrels
I can recut barrel crowns or do new ones .
Barrel straightening and cutting
properly indexed port work
extreme shrouds available
custom quick fill inserts for rapids
http://www.airgunadvice.net/index.php
I can be reached at swiftairgunparts@sbcglobal.net
or PM me( 220swift )on the airgunadvice site above
Thanks for looking
Ernie
I have been working on my own shop and have it setup for doing Airguns and fabrication of small parts for several different lines of work but i concentrate on PCP type air guns and hop up parts.
my main focus is the rapid mark II line of PCP but i also work on Daystates, AirArms,
and will do most any mods with these and other makes .
heres my shop setup .
i have this room dedicated for machine work and have it setup now thanks to Rutland Tool & supply
a 13 x40 gear head production lathe
Jet Mill 8 x36 table with DRO readout.
customer security system . come with guard dog
custom made parts with indexer or
rotary table for future work
custom port work on barrels
I can recut barrel crowns or do new ones .
Barrel straightening and cutting
properly indexed port work
extreme shrouds available
custom quick fill inserts for rapids
http://www.airgunadvice.net/index.php
I can be reached at swiftairgunparts@sbcglobal.net
or PM me( 220swift )on the airgunadvice site above
Thanks for looking
Ernie
Thursday, October 9, 2008
The .50cal Rapid project
Started fitting the 50cal barrel
thanks to Tofazfou for the donor barrel for this project
I started doing this to see if the Rapid platform can support such a caliber.
and to improve on any parts that are already produced
some testing done as its just getting under way .
the Barrel started from a dragon slayer 50cal that was converted to a 45cal
and was left over for this project .
here was the 45 and 50cal barrels
the barrel was then turned down to fit in the rapid receiver and ported for the install.
next was the pellet probe this is done in two parts the outer part that seat on the barrel and the inner probe that pushes the pellet or in this case the round ball in the barrel
due to the outer O.D. of this barrel i also had to slab cut it .060th to clear the 500cc air bottle
you can barely see the flat in the barrel
For the ammo I went with
Hornady .50 Cal, 176 Grains, Lead Round Balls ordered from
Impact Air Gun
he had the best price on them .
720 fps will give 200fpe so that's my set goal.
The Dragon Slayer barrel i have from the gun I think was up around 600 plus fps form the past setup . .
here are the 50cal round balls next to some 25cal in the middle and some of the .22calgold kodiaks lower
best output from this to date is 110fpe or 529fps
still working on the setup and internals parts .
and then heres some shot strings for past testing.
first set
it was up to 107.2 fpe
519.3
519.5
518.9
515.8
520.2
518.7
519.4
small shot string
its good like this for several rounds .and latter i did some inturnal stuff and moved that number up .
524.4
525.2
526.4
524.4
524.1
529.1===110.9fpe
526.8
524.9
527.1
tic tic tic tic a little at a time
enjoy
the Swifty Fifty Post
thanks to Tofazfou for the donor barrel for this project
I started doing this to see if the Rapid platform can support such a caliber.
and to improve on any parts that are already produced
some testing done as its just getting under way .
the Barrel started from a dragon slayer 50cal that was converted to a 45cal
and was left over for this project .
here was the 45 and 50cal barrels
the barrel was then turned down to fit in the rapid receiver and ported for the install.
next was the pellet probe this is done in two parts the outer part that seat on the barrel and the inner probe that pushes the pellet or in this case the round ball in the barrel
due to the outer O.D. of this barrel i also had to slab cut it .060th to clear the 500cc air bottle
you can barely see the flat in the barrel
For the ammo I went with
Hornady .50 Cal, 176 Grains, Lead Round Balls ordered from
Impact Air Gun
he had the best price on them .
720 fps will give 200fpe so that's my set goal.
The Dragon Slayer barrel i have from the gun I think was up around 600 plus fps form the past setup . .
here are the 50cal round balls next to some 25cal in the middle and some of the .22calgold kodiaks lower
best output from this to date is 110fpe or 529fps
still working on the setup and internals parts .
and then heres some shot strings for past testing.
first set
it was up to 107.2 fpe
519.3
519.5
518.9
515.8
520.2
518.7
519.4
small shot string
its good like this for several rounds .and latter i did some inturnal stuff and moved that number up .
524.4
525.2
526.4
524.4
524.1
529.1===110.9fpe
526.8
524.9
527.1
tic tic tic tic a little at a time
enjoy
the Swifty Fifty Post
Subscribe to:
Posts (Atom)